What Is the Barrel Pump Supposed to Do?
A barrel pump is a specifically designed tool that is able to dispense liquid materials from containers such as drums and barrels. Drum pumps are another name for these devices. They have a wide variety of components including different tube lengths that can be used depending upon the industry that you are in. You can find manual operation very easy using the plungers and levers that must be moved in order to extract the fluid from any of the containers that you are working with at the job site. If you are looking for an electric barrel pump then see here.
How Do They Extract the Fluid?
If you work at a processing plant, and you have barrels that measure 100 L or higher, you will probably use these for chemicals that you are transferring. The liquids may not be safe, and it is also not safe to tip them, which is where the barrel pump comes in. It allows the fluids to be extracted in the safest manner possible.
There is a motor at the top of the barrel pump which does all of the work, extracting everything through the immersion tube. This tube, which can be significantly longer, is properly affixed to the motor and is sealed to prevent leakage. As you look at the different sizes of tubes that are available, you will see that they are made for different types of liquids. The pump on top, which is connected to the immersion tube, will then be placed on top of the barrel to do the work. The liquid is going to come up through the sleeve, and into the tube, so it can be discharged at the proper location.
Therefore, if you are working with medium viscosity, or even though viscosity fluids, these centrifugal pumps may use several different impellers that will rotate. As the rotation begins, the liquid is extracted upwards through the tube.
Depending upon the viscosity of the fluid, you may have to use a displacement pump. Medium viscosity fluids, for example, may require you to use a screw-type lifting compressor. Once it is connected, it is possible to extract different types of solvent, ink, and even paint. If it is a high viscosity, the cavity design models are the best. These are used for many different purposes including the extraction of silicone, adhesives, honey, oil, juice concentrate, waxes, adhesives, glycerin, and even polymers. You can find many sources for FDA-compliant options and information.
Top Features Of A Barrel Pump
In order for all of this to work, you will need to connect the immersion tubes, and the various motors that are available, so the barrel pump can be activated on top of the containers in which the liquid is located. Most of the motors by design are very easy to connect and disconnect to another pump tube. If you don’t have access to electricity, there are a wide variety of air-powered motors which you could also use. All of these can be disassembled very easily, and if you need to replace a part, this can be done within minutes.
The length of the tube is always dependent upon the size of the container. An example of this would be working with a standard 200 L container, which is essentially a 45-gallon barrel, and you would need to use a tube that is at least 100 cm in length. You would use something smaller for 15 to 30 gallon-sized containers that would be designed to work with a particular motor you are currently using.