Do you want to keep your cabinets but fix the look or paint the job?
Cabinet refinishing is perfect for those who want to give their cabinets a new look but don’t want to spend money on purchasing new ones. It can also work perfectly if you purchased cheap cabinets that you dislike the look of.
With that said, if you have never refinished cabinets, it can be a little confusing about where to start. Keep reading to learn more about cabinet refinishing and the tips you must pay attention to.
1. Gather the Necessary Supplies
One of the most important tips for beginners is gathering the necessary supplies for cabinet refinishing. Start by taking detailed measurements of the cabinet doors and shelves if you do this as a DIY project.
You will also need to purchase cleaner and sandpaper of different grits, a good grade of primer, paint or stain of your choice, and paint brushes or rollers. Special applicators are also available for cabinet refinishing, making the process much easier.
Make sure you have drop cloths, painter’s tape, and a protective clear coat. Having all the necessary supplies in one place will make the refinishing process much more efficient.
2. Prepping the Surface
Prepping the surface is the key to any successful cabinet refinishing job. Beginners should make sure every surface is clean and dry before starting. Remove all hardware and clean it separately.
Once the surface is prepared, lightly sand it with fine-grit sandpaper to remove any surface dirt or grease. Sanding is important to create a smooth, even surface for application.
Use a vacuum cleaner or a damp cloth to remove dust from the sanding process, and ensure all surfaces are dry before repainting. Finally, use a high-quality primer to create the ideal base for paint adhesion. Follow these steps, and the cabinets will look brand new after refinishing.
3. Selecting the Paint & Finish
When selecting the paint and finish for cabinet refinishing, beginners should keep a few tips in mind. Prepare the surface by sanding to remove dust and debris and fill in any holes or cracks.
Apply a thin primer coat followed by 1-2 coats of high-quality latex paint. For those looking for a glossy sheen, use a water-based urethane or an oil-based enamel. When applying the paint, use thin, even strokes and avoid overworking the same area, which can create brush marks.
Allow ample drying time between coats. For the best, professional-looking finish, top off the project with a coat of clear sealer. Lastly, ensure proper painting tools are on hand, including a soft brush, lint-free cloth, and good-quality paint. Accurate preparation, gradual application, and the right tools will help to ensure a successful refinishing project.
Read Here About Cabinet Refinishing
If you’re looking to spruce up your kitchen cabinets without shelling out for expensive replacement, cabinet refinishing is a great option for beginners.
With just a few simple tips and techniques, you can effortlessly and cost-effectively turn your drab cabinets into showpieces you’ll be proud of. So gather the supplies, and assess your cabinets.
Did you find this article helpful? Check out the rest of our blog for more!